Engineering Catalogue > Robotics > 6 Axis Robots > 6 Axis Industrial Spraying Robot BRTIRSE2013F

6-Axis Industrial Spraying Robot BRTIRSE2013F

Axes
6
Reach
2000 mm
Payload
13 kg
Repeatability
±0.5 mm
Protection
IP65 + explosion-proof
Power
220V ±10% / 50 Hz ±1%
Operating temperature
0–40 °C (optimal 15–25 °C)
Relative humidity
20–80 % RH (non-condensing)
Reducers
RV + planetary
Internal gas pressure
≤0.1 MPa
Primary application
Industrial spraying in hazardous environments
6-Axis Industrial Spraying Robot BRTIRSE2013F

Explosion-proof 6-axis industrial spraying robot with 2000 mm reach and 13 kg payload. IP65 protection, 220V/50Hz, operating range 0–40°C, ±0.5 mm repeatability. RV and planetary reducers, partial internal wiring, portable conversational control.

Related products

SCARA Robots

SCARA Robots

Parallel Robots

Parallel Robots

About 6-Axis Industrial Spraying Robot BRTIRSE2013F

6-Axis Industrial Spraying Robot BRTIRSE2013F for hazardous-environment spraying

Powered by Geoffy
What is this for?

Key features

  • Six-axis industrial spraying robot
  • 13 kg payload
  • IP65 + explosion-proof protection
  • Primary application: industrial spraying in hazardous environments

Common uses

  • Industrial spraying in hazardous environments

The BRTIRSE2013F covers the core selection information for a hazardous-environment spraying robot: movement configuration, reach, payload, repeatability, protection, power and operating limits. It is most useful as a specification reference when an engineering team is defining or checking an industrial spraying application against stated equipment requirements. The available data describes the robot’s technical envelope without adding unsupported claims about a particular coating, spray tool or production process.

Common questions
Why might a six-axis configuration matter when comparing spraying robots?

The 6-Axis Industrial Spraying Robot BRTIRSE2013F provides six axes, giving the product its stated multi-axis robot configuration. This is a relevant comparison point when a project specification calls for the robot to be assessed by axis count alongside reach, payload and repeatability. However, the supplied data does not describe individual joint ranges, path flexibility, cycle time or coating results. Those criteria cannot be concluded from the six-axis designation alone.

Is the BRTIRSE2013F specified for hazardous environments?

The 6-Axis Industrial Spraying Robot BRTIRSE2013F is listed for industrial spraying in hazardous environments and has IP65 plus explosion-proof protection in the provided specifications. These are the stated environmental and protection characteristics. The data does not identify an explosion-protection certification, hazardous-area classification, permitted coating or installation standard. Those details must be checked separately before confirming compliance with a particular site or process.

What operating conditions are listed for the BRTIRSE2013F?

The 6-Axis Industrial Spraying Robot BRTIRSE2013F is listed for 0–40 °C operating temperature, with an optimal range of 15–25 °C, and 20–80% relative humidity without condensation. Its power requirement is 220V ±10% at 50 Hz ±1%. The data also lists internal gas pressure of no more than 0.1 MPa. These values provide installation checks, but do not establish performance outside the stated conditions.

Specification
FieldValue
ReducersRV + planetary
Axes6
Payload13 kg
ProtectionIP65 + explosion-proof
Power220V ±10% / 50 Hz ±1%
Operating temperature0-40 °C
Optimal temperature15-25 °C
Relative humidity20-80% RH (non-condensing)
Internal gas pressure≤0.1 MPa
Primary applicationIndustrial spraying in hazardous environments

For specification checks, the BRTIRSE2013F data covers motion, load, repeatability, protection, power and environmental limits. The most specific installation values are the 220V ±10% / 50 Hz ±1% supply, 0–40 °C operating range, 20–80% non-condensing humidity and internal gas pressure of ≤0.1 MPa. The listed reducer arrangement is RV plus planetary. No dimensions, mass or cycle-time data is provided.

Why this product?
  • The stated primary application is industrial spraying in hazardous environments.
  • The listing identifies IP65 plus explosion-proof protection.
  • Reach, payload and repeatability are given as measurable selection criteria.
  • Electrical supply requirements are stated as 220V ±10% / 50 Hz ±1%.
  • Temperature, humidity and internal gas-pressure limits are provided for specification checks.

TritonLED Sweden AB

Address

SÖDERLUNDSVÄGEN 15, 653 50 Karlstad, Sweden

Phone

+46 70 331 49 76

Triton Engineering DOO

Address

Put N. Partizanskog Odreda 4a, 21000 Novi Sad, Republic of Serbia

Phone

+381 66 610 36 16

Navigation

HomeAboutLED SolutionsEngineering SolutionsBlog

Copyright © 2026 Triton Engineering

Privacy PolicyCookies